Version 8.11 July 23 22, 2021
- Added All Output Mute when changing sample rates.
Version 8.10 April 22, 2021
- “TB3 …” button on Routing page (both input and output) now reflects the mute state of the underlying buttons. Green if any button is unmuted, Red if all buttons are muted.
- “ADAT …” button on Routing page (both input and output) now reflects the mute state of the underlying buttons. Green if any button is unmuted, Red if all buttons are muted.
- Fixed volume control for Test Tone on Routing page which would mute if no other sources were unmuted.
- Fixed issue where first four output volumes and all of the output mutes would not show correctly in Hilo Remote after Hilo power up.
Version 8.9 Mar 1, 2021
- Fixed startup trim issue.
Version 8.8 October 6, 2020
- Updated About Hilo to show 8.8 application version.
Version 8.7 October 27, 2018
- Updated About Hilo to show 8.7 application version.
Version 8.6 June 11, 2020
- Updated About Hilo to show 8.6 application version.
Version 8.5 October 29, 2019
- Added support for LT-TB3.
- Fixed issue with Version 8.4 where ADAT input would not work.
Version 8.4 October 28, 2019
- Internal build for testing purposes.
Version 8.3 October 27, 2018
- Removed excessive writes to PROM configuration register that may rarely cause the Hilo to not startup properly if the Hilo is turned on then off very quickly using the rear power switch.
Version 8.2 July 24, 2018
- Fixed production test issue. Relays were muted when calibration window was active.
Version 8.1 July 5, 2018
- Added support for Winbond PROM and new display on Rev C PCB.
Version 8.0 January 9, 2017
- Complete redesign of user interface.
- Added Monitoring page to allow for monitor controller functionality.
- Added support for LT-DANTE.
- Updated About Hilo to show 8.0 application version.